Pinatas were once made of clay pottery, but today they're made of papier-mache. The traditional six-point star pinata of Mexico has been replaced with a variety of other shapes, including animals, toys, people and fruits.
Instructions
Making the Pinata
1. Fold six sections of newspaper in half.
2. Roll each section into a cone shape and secure each with masking tape. The cones should all be about the same size.
3. Cut the bottoms of the cones off so they'll stand level.
4. Inflate a 12-inch balloon and tie it shut.
5. Make up papier-mache paste (see "Make Papier-Mache Paste," under Related eHows).
6. Cut some newspaper into 1- to
7. Dip a strip into the paste and put it on the balloon.
8. Repeat until the balloon is covered.
9. Put one paper cone on the balloon and cover it with strips of paper dipped in the paste. Use the strips to hold the cone to the balloon.
10. Attach all of the cones this way.
11. Let the paste dry completely.
12. Poke a pin into the balloon to pop it.
13. Cut a small access hole off-center in the top of the pinata and on each of the cones.
14. Fill the pinata and cones with candy, small toys or trinkets.
Decorating the Pinata
15. Cut green, white and red tissue paper into 2-inch-wide strips.
16. Fold one in half lengthwise without forming a crease.
17.Make cuts along the folded edge of the tissue paper, about 1/4 inch apart, to create a fringe. Don't cut all the way to the open edge.
18. Keep the paper folded and glue the open side to the pinata. The fringed edge should go toward the floor.
19. Cover the entire pinata with the
20. Make a tassel for each point on the star with 6-inch-long pieces of metallic curling ribbon in silver, red and green. Wrap the final piece of tissue over the ends of the tassel to hold them on securely.
21. Hang, and beat the heck out of it.
Tags: tissue paper, 2-inch-wide strips,