Sunday, February 23, 2014

Generac Generator Troubleshooting

Won't Start


There are a few issues that can develop with a Generac generator. The first is if it won't start at all. When this happens you should look to the fuel tank first to determine if it is out of gas. This is an easy matter to resolve. If the fuel is OK, the other items can be looked at. First check the Generac engine on off switch to make sure it is in the on position. Also the spark plug should be tested to see if it has gone bad, and the wire connected to the spark plug slot should be checked to make sure it hasn't come undone.


Running Rough


If the engine is running rough, the Generac generator could have a fuel mix that isn't right or water in the fuel tank. If the fuel mix, is off a Generac service company will need to be called. If there is water in the tank. Drain the tank and carburetor and refuel. If it isn't any of these things, look to see if the intake valve is stuck. This will also require a repairman to fix.


Engine Works But No Power


If the engine is working fine but the Generac generator isn't putting out any power, then it could be the circuit breakers. Check and reset them to see if this is the problem. It could also be the connection itself of the item being powered. Both of these should be eliminated as the cause of power problems. If nothing else is found, then it is more than likely a fault in the generator and a repairman will need to be called.








Related Posts:




  • Troubleshooting A Sears Craftsman Riding Lawn Mower

    Sears Holdings Corporation owns the Craftsman brand name. Craftsman riding lawn mowers are equipped with features such as adjustable gauge wheels, automatic transmissions and spring-loaded deck li...


  • Lg Refrigerator Troubleshooting

    A number of small problems could occur with an LG refrigerator, and most of them relate to the refrigerator or accompanying freezer not being able to get to a temperature cold enough to perform it...


  • Dodge Neon Automatic Transmission Troubleshooting

    The powertrain control module acts as a part of your Neon's Onboard Diagnostic System.The automatic transmission of your Dodge Neon may begin to make a loud whining or grinding noise. You will nee...


  • Troubleshooting A Honda Pressure Washer

    Honda Powered Pressure WasherPressure washers equipped with Honda engines are a good choice for home owners and professionals alike. Now that the quality of equipment has improved along with price...


  • Shallow Well Pump Troubleshooting

    Shallow wells are typically wells that are less than 40 feet deep. The pumps that service these types of wells can be either a single-pipe or a double-jet pump. The jet-type pump forces water back...